| |
If you're a Motorcycle Card user, please click
here. Otherwise, read on for correct E-way® tag mounting:
- Which windscreen?
- Assembly
- Position
- Mount
Next, you need to select a mounting location on inside of the windscreen
and clean it with the swab. For sloping windscreens this
is usually the area directly behind the rear view mirror, but you
need to ensure there is enough space and no metal from sun visors
etc covers the tag.
NB: Some cars have imbedded sensors or metalised
windscreens that restrict tag function.Click
here for mounting locations on specific models or consult
your car's user manual.
For vertical windscreens this is usually in the centre of the windscreen
a few centimetres above the dash, but you need to ensure you need
to ensure there is enough space and no metal from stone guards etc
covers the tag. NB: For split windscreens place left of the
join.
| CORRECT PLACEMENT OF YOUR
E-way® TAG |
CHOICE OF BRACKET
The choice of bracket will depend on whether your vehicle
has a vertical or sloped windscreen. The correct bracket
will send the signal at the right angle to be read by
the readers in an overhead gantry at the toll plaza.
LOCATION
The correct location of a tag using the correct bracket
is important for performance of the tag. Tags should NEVER
be handheld, attached to the dash or left in the glovebox.
Tag users who don't fit their tag correctly may be levied
the administration charge in the event that the tag is
not read.
INTERCHANGEABLE BRACKET
If you want to use the tag in more than one vehicle with
a sloped windscreen there is an interchangeable bracket
available. If your vehicles are a mix of sloped and vertical
windscreen then a separate bracket and tag are required.
|
|
| SLOPED WINDSCREEN
|
- For sloped windscreens the best location is
attached to the windscreen behind the rear vision
mirror.
- If there is insufficient room then locate adjacent
to rear vision mirror at the top of the windscreen.
- If there is any metal such as external sun visors,
ladders, etc, above the tag it will need to be mounted
lower down the windscreen.
- If you have a metalised windscreen, consult your
vehicle's user guide for the clear window section
of the windscreen for correct location.
- For split windscreens place the tag left of the
join.
|
|
SLOPED WINDSCREEN: Attach your tag to the windscreen
behind the rear vision mirror.
| VERTICAL WINDSCREEN
|
- For vertical windscreens the best place is at the bottom of the windscreen in the centre.
- If there is any metal such as stone guards, etc, above the tag it will need to be mounted higher up the windscreen.
|
|
VERTICAL WINDSCREEN: Attach your tag to the bottom of the
windscreen in the centre.
Bracket Removal Tip:
Use a hair dryer to heat the area of the windscreen to
melt the glue
on
the bracket for easier removal.
|
|
|
 |
|
|
Mounting Locations
